HearthStone Quality Home Heating Products Inc | Champlain Model #8300 |
thermostat wire so it is directed towards the thermostat, being sire to leave a small coil of wire behind the unit so that it can be moved out of position for servicing and cleaning. (At the thermostat, the wires should be connected to the two connection screws on the back of the thermostat per the instructions received with the thermostat) Take care not to
BLOWER FAN
The unit can also be equipped with an optional blower fan, which turns on and off independently of the burner flames. When the speed switch, which allows you to turn the fan on or off and control the speed of the fan to suit your needs, is set to “On” the fan will automatically turn on when the stove is hot and cycle off when the unit is no longer hot. Installation instructions are provided with the Kit.
ELECTRICAL GROUNDING
INSTRUCTIONS
This appliance is equipped with a three- prong (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded three- prong receptacle. Do not cut or remove the grounding prong from this plug.
WIRING INSTRUCTIONS
›CAUTION: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing. (Attention: Au moment de l’entretien des commandes, étiquetez tous les fils avant le débranchement. Des erreurs de câblage
peuvent entraîun fonctionnement inadequate et dangereux.)
The proper location of wire connections is shown in Figure 13.
25
