Westinghouse TX-52H480S user manual Hdtv/Accessory Setup, Connecting Your HDTV, Power, English

3.HDTV/ACCESSORY SETUP

Now that you’re familiar with the basics of digital television and the various controls and connections for your HDTV, you’re ready to enjoy its superb picture quality and sound, along with the ultimate convenience of connecting your game consoles, VCR, DVD, audio devices or personal computer.

NOTE: If you have already performed the steps in the Quick Setup Guide, skip to the instructions specific to the accessory you want to connect.

Connecting Your HDTV

Power

ξConnect the supplied AC power cord to

your HDTV’s “AC In” jack and to a properly grounded AC outlet

—If you’re using an antenna or your

cable service, connect the antenna or cable (not supplied) to the “Antenna’” connector

—If you’re using a satellite receiver, connect to either the “HDMI” connector (see page 15 for connector descriptions and locations)

ξPress the Power button on either the remote control or the side-mounted control panel to turn your HDTV on (it will take a few seconds to power up)

Choose Your TV Source Press the “Menu” button on your remote or the side panel to access the On Screen Display (OSD)

—Use the right/left arrow buttons to scroll across to the “TV” menu

—Use the up/down arrow keys to select “Tuner Source”

ξUse the arrow keys to select your signal source “Air/Cable/IRC/HRC”

—If you use a rooftop or indoor antenna, select “Air”

—If you use a cable service, select “Cable,” “IRC” or “HRC” (depending on

the frequency used by your cable service)

NOTE: When using a DVI or HDMI connection, the cable box or satellite receiver needs to be restarted to complete HDCP authentication.

English

19