Programming Radio
Programming FM Stations Automatically – Auto Preset
Auto presets store the frequencies of radio stations into memory so you can select your favorite channels without tuning manually. Radio station signals can be automatically located and stored. This function does not apply to AM stations (see page 34).
Display
1
Before auto presetting
If any radio stations are preset before you start the auto preset procedure, they will be replaced with new presets.
2-4
2
Turn on the power to the unit before you start the procedure.
Note:
•Auto presetting may store noise instead of a station with a clear signal to some preset channels, depending on your location. In such cases, erase the preset manually (see page 41).
1
2
3
Press INPUT / to display “FM.”
AUTO
SOURCE
To improve the FM reception, adjust the antenna position.
Press EDIT/NO/CLEAR and turn MULTI JOG to display “AutoPre- set?”
AUTO
Press MULTI JOG.
The confirmation message “AutoPre- set??” appears in the display.
AUTO
To cancel auto presetting, press EDIT/ NO/CLEAR.
4 | Press MULTI JOG. |
| |
| Auto presetting starts. |
AUTOFM ST
SOURCE
You can preset up to 20 stations. The pre- set stations will be automatically sorted in frequency order.
Customizing the Preset Channels
The following additional functions are available:
•Naming a preset channel (see page 42)
•Erasing a preset channel (see page 41)
•Copying the radio station in the selected channel to another (see page 40).
Using the remote controller
2
1
2 3, 4
36