22Setting Surface Controls
KEEP WARM FEATURE
The Warm feature may be used with any of the Cooking Elements.
To Turn the Keep Warm Feature ON:
1. To select the Keep Warm feature for any Cooking Element touch the key pad for
ON OFF
the corresponding Cooking Element.
2.Touch the key pad located in the main control area. The Cooking Zone will display LH (Low Heat) for radiant elements and L for induction element indicating that the Cooking Zone is properly set to Keep Warm.
MINUTE TIMER
The Minute Timer feature may be useful in the kitchen if a recipe calls for keeping track of time. This feature will keep track of time from 1 to 99 minutes. The LED display will begin to count down minutes once set.
To Set the Minute Timer: |
|
|
|
|
|
|
|
|
|
|
| ||
1. | To activate the timer, touch the | pad. |
|
|
| ||||||||
|
|
| timer |
|
|
|
|
|
|
|
| ||
2. | Touching and releasing the | or the |
| key pads will increase or decrease the Minute | |||||||||
| |||||||||||||
| Timer setting by 1 minute with each key press (up to 99 minutes). During the setting a | ||||||||||||
| dot will flash in the display |
|
|
|
|
|
|
|
|
|
|
| |
3. | Once the Timer is set and no timer |
| and |
| key pads are pressed for 5 seconds the | ||||||||
|
| ||||||||||||
| Minute Timer begins the countdown and the dot LED will stop flashing and will stay on | ||||||||||||
| in the display. Once the Minute Timer reaches 00 long beeps will sound indicating that | ||||||||||||
| the time is up. To stop the control from beeping, touch the | pad or the and |
| key | |||||||||
|
| ||||||||||||
| pads at the same time. |
|
|
|
|
|
|
|
| timer | |||
|
|
|
|
|
|
|
|
|
|
|
| ||
To Cancel the Minute Timer: |
|
|
|
|
|
|
|
|
|
|
| ||
1. | Touch the | pad or the | and |
|
| key pads at the same time or set the timer to 00. | |||||||
| |||||||||||||
2. |
| timer |
|
|
|
|
|
|
|
|
|
|
|
The set time will disappear from the LED indicating that the Minute Timer is no longer active. |
LOCKING THE CONTROLS
The Cooktop Controls may be locked in order to prevent the cooktop from accidentally being turned ON. This feature can be activated only when the cooktop is OFF.
To Turn ON the Controls Lock Feature:
Touch and hold the key pad. After few seconds a beep will sound and "-
lock
showed on the surface element controls. This will keep any Cooking Element or Cooktop functions from being accidentally turned ON. The Minute Timer is not affected by this feature.
To Turn OFF the Controls Lock Feature:
Touch and hold the key pad. After few seconds a beep will sound and all LED displays
lock
will turn OFF indicating the cooktop is unlocked. The Cooking Elements or any of the other Cooktop functions may now be used.