Instructions for use
22
Set the Delay Timer/Soaking Duration
Delay Timer
The button DELAY TIMER (ZEITVORWAHL, DEPART DIFFERE) allows the
start of a washing program to be advanced by 1 to a maximum of
19 hours.
0 To do this, press the button DELAY TIMER
(ZEITVORWAHL, DEPART DIFFERE) as often as
necessary until the required start delay is
shown in the multidisplay, e.g.12h in the form
for a program start delay of 12 hours.
If19h is shown and you press again, 0h and
afterwards the run time of the set washing
program appears (display in minutes, e.g.126).
In this state, the delay timer is not set.
3 Once the delay timer has been set, it will only be activated after press-
ing the START/PAUSE button.
Soaking Duration
With the SOAKING button pressed, you can extend the soaking dura-
tion with the button DELAY TIMER (ZEITVORWAHL, DEPART DIFFERE)
(maximum 10 hours and approx. 20 min.).
3 Without delay timer, the soaking duration is approx. 30 minutes, plus a
pre-wash time of approx. 20 minutes.
0 To set, press the button DELAY TIMER (ZEITVORWAHL, DEPART DIFFERE)
as often as necessary until the required soaking duration is shown in
the multidisplay, e.g.1h (= 1 hour).
After approx. 2 seconds, the multidisplay
shows the run time in minutes.
This run time is comprised as follows:
3 While SOAKING (EINWEICHEN, TREMPAGE) is running, PRE WASH
(VORWÄSCHE, PRELAVAGE) lights up on the program sequence display.
selected soaking period e.g. – 1h =60 minutes
+ heating up/prewash period e.g. approx. 20 minutes
+ run time of the selected washing program e.g. approx. 126 minutes
=displayed value e.g. approx. 206 minutes