Manuals / Brands / Laundry Appliance / Washer / Electrolux / Laundry Appliance / Washer

Electrolux 3450 Setting up and connection instructions Safety Instructions for Installation

1 56

Download 56 pages, 819.42 Kb

Setting up and connection instructions

44

Setting up and connection instructionsSafety Instructions for Installation

•Do not tilt the washing machine onto its front or onto its right side

(looking from the front). Electrical components could get wet!

•Check the washing machine for transport damage. Never connect a

damaged unit. Consult your supplier in the event of damage.

•Ensure that all parts of the transport safeguard have been removed

and that the splash guard is fitted to the unit, see ”Removing the

Transport Safeguard”. Otherwise, damage to the unit or to adjacent

furniture could occur during spinning.

•Always insert the plug into a correctly installed PE socket.

•In the case of permanent installation: A permanent installation may

only be made by an authorised specialist.

•Before putting the unit into operation, ensure that the rated voltage

and current type shown on the unit's rating plate are the same as the

mains voltage and current type at the installation location. The re-

quired electrical fuse is also shown on the rating plate.

•Should work be carried out on the water supply installations in order

to allow the machine to be connected properly to the water supply,

this work must be carried out by an authorised installer.

•Should work be carried out on the mains supply in order to allow the

machine to be connected properly to the electricity supply, this work

must be carried out by an authorised electrician.

•The mains cable may only be replaced by the Customer Service or by

an authorised specialist.

Contents

Main Dear customer, 1 3 2 Contents Instructions for use Setting up and connection instructions . . . . . . . . . . . . . . . . . 44 Page Instructions for use 1 Safety Before Putting into Operation for the First Time Correct Use Child Safety General Safety 2 Disposal 2 Environment Tips Unit Description Front View Drawer for Washing Powder and Care Agent Control Panel Program Selector 2 3 Additional Program Buttons Consumption Values What Does Update Mean? Water Protection Aqua Control Before the First Wash Prepare the Washing Cycle Sort and Prepare the Washing Washing Types and Care Codes Washing Detergents and Care Agents Which washing detergent and care agent? How much washing detergent and care agent? 2 Water Softener Run a Washing Cycle Brief Instructions Setting the Washing Program 3 Changing the spin speed/Selecting the rinse hold function 3 Set the Delay Timer/Soaking Duration Delay Timer 3 Soaking Duration 3 This run time is comprised as follows: 3 Opening and Closing the Filling Door 3 Add the Washing 3 Add Washing Detergent/Care Agent 3 Start the Washing Program 3 Completion of the Washing Program 3 Changing a Washing Program 3 Washing Cycle Ended/Remove Washing Program Tables Washing Page Separate Conditioning/Starching /Impregnating Separate Rinse Separate Spin Cleaning and Care Control Panel Washing Detergent Drawer Washing Drum Filling Door What to do if ... Remedying Faults Page Page Page If the washing result is not satisfactory Carry Out an Emergency Emptying Operation 1 Drain pump 1 Page Additional Rinse (RINSE+/SPLEN+/RINCAGE+) 3 Child Safety Feature 1 Setting up and connection instructions Safety Instructions for Installation Setting Up the Unit 3 Transporting the Unit Remove transport packaging 3 Prepare the Installation Location Setting Up on a Concrete Pedestal Setting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection ; Water Connection 3 Permissible Water Pressure 3 Water Drainag e Delivery Heads over 1m Technical Data Dimensions Customer Services Schweiz - Suisse - Svizzera Index Service