Electrolux 3450 3

Instructions for use

25

Start the Washing Program

0 1.Check that the water valve is open.

2. Start the washing program: Press the button

START/PAUSE. The washing program is started

or it starts after the set time expires.

3 The filling door is not correctly closed if, when the button START/PAUSE

is pressed,

–the indicator DOOR (TÜR, PORTE) flashes red

–the fault code E40 in the multidisplay flashes

–and the indicator MAIN WASH (HAUPTWÄSCHE, LAVAGE) flashes.

In this case, press the filling door firmly closed and again press the but-

ton START/PAUSE.

If the time preselection is set:

A set time preselection runs and the remaining time until the program

start is displayed (in each case in full hours, e.g. 5h). During this time

you can load washing or change/abort the time preselection.

•Load washing: Press the button START/PAUSE. The filling door can be

opened. Next, close the door and again press the button START/

PAUSE.

•Change or abort time preselection: Press the button DELAY TIMER

(ZEITVORWAHL, DEPART DIFFERE) as often as necessary until the re-

quired time is displayed; when the program run time is displayed (dis-

play in minutes, e.g.126), the washing program starts without delay.

Contents

Main Dear customer, 1 3 2 Contents Instructions for use Setting up and connection instructions . . . . . . . . . . . . . . . . . 44 Page Instructions for use 1 Safety Before Putting into Operation for the First Time Correct Use Child Safety General Safety 2 Disposal 2 Environment Tips Unit Description Front View Drawer for Washing Powder and Care Agent Control Panel Program Selector 2 3 Additional Program Buttons Consumption Values What Does Update Mean? Water Protection Aqua Control Before the First Wash Prepare the Washing Cycle Sort and Prepare the Washing Washing Types and Care Codes Washing Detergents and Care Agents Which washing detergent and care agent? How much washing detergent and care agent? 2 Water Softener Run a Washing Cycle Brief Instructions Setting the Washing Program 3 Changing the spin speed/Selecting the rinse hold function 3 Set the Delay Timer/Soaking Duration Delay Timer 3 Soaking Duration 3 This run time is comprised as follows: 3 Opening and Closing the Filling Door 3 Add the Washing 3 Add Washing Detergent/Care Agent 3 Start the Washing Program 3 Completion of the Washing Program 3 Changing a Washing Program 3 Washing Cycle Ended/Remove Washing Program Tables Washing Page Separate Conditioning/Starching /Impregnating Separate Rinse Separate Spin Cleaning and Care Control Panel Washing Detergent Drawer Washing Drum Filling Door What to do if ... Remedying Faults Page Page Page If the washing result is not satisfactory Carry Out an Emergency Emptying Operation 1 Drain pump 1 Page Additional Rinse (RINSE+/SPLEN+/RINCAGE+) 3 Child Safety Feature 1 Setting up and connection instructions Safety Instructions for Installation Setting Up the Unit 3 Transporting the Unit Remove transport packaging 3 Prepare the Installation Location Setting Up on a Concrete Pedestal Setting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection ; Water Connection 3 Permissible Water Pressure 3 Water Drainag e Delivery Heads over 1m Technical Data Dimensions Customer Services Schweiz - Suisse - Svizzera Index Service