Operating instructions
13
b) Setting electronically
The dishwasher is factory set at level 5.
1. With the dishwasher switched off, press the On/Off button.
The end of programme indicator light flashes (setting mode).
In case salt and/or rinse aid refilling is necessary the corresponding
indicator lights illuminate.
If one of the washing programme indicator lights is on, this means
that a washing programme has been set.
The setting must be cancelled: press for about 3 seconds the
programme selection/cancel button; the indicator light of the set
programme turns off and the end of programmeindicator light
flashes, indicating that the set programme has been cancelled and
that the machine is now in setting mode.
2. Press and keep pressed the programme selection/cancelbutton
until programme indicator light 1flashes and programme indicator
light 2illuminates with a fixed light.
Wait until programme indicator light 2turns off, programme
indicator light 1goes on flashing and simultaneously the end of
programmeindicator light starts flashing.
This indicates that you have activated the electronic setting
function of the water softener.
The current level is indicated by a sequence of flashes of the end of
programmeindicator light, a sequence of intermittent audible
signals and a pause of a few seconds (see chart).
Example: 5 flashes + pause + 5 flashes signals etc...= level 5
3. To change the level, press the programme selection/cancelbutton.
Each time the button is pressed the level changes. (For the selection
of the new level, see chart).
Examples:
if the current level is 5, by pressing the programme
selection/cancel button once, level 6 is selected.
if the current level is 10, by pressing the programme
selection/cancel button once, level 1 is selected.
The end of programmeindicator light remains off for a few
seconds and then starts flashing indicating the new selection is set.
4. To memorise the operation, switch off the machine by pressing the
On/Off button or wait for about 60 seconds, after which the
machine will automatically return to setting mode.
152950 74/0en 2-10-2006 10:25 Pagina 13