Electrolux 35085 VI Use of "3 in 1" combi detergents

Operating instructions

25

Use of "3 in 1" combi detergents

These products are detergents with a combined cleaning, rinsing and

salt function.

1. Check whether these detergents are suitable for your water

hardness. Follow the manufacturers instructions.

NOTE: the refilling of the salt container and the rinse aid dispenser are

no longer necessary.

In this case the rinse aid indicator light will always remain illuminated

when the machine is switched on.

2. Select the lowest setting for water hardness.

3. Before the start of the washing programme put the "3 in 1"

detergent in the detergent dispenser.

NOTE: If the drying results are not satisfactory we recommend that

you:

1. Fill up the rinse aid dispenser with rinse aid.

2. Set the rinse aid dosage to position 2.

If you decide to turn back to the use of the standard

detergent system we advise that you:

●Fill up the dispensers for salt and rinse aid again.

●Adjust the water hardness setting to the highest setting perform up

to 3 normal washing programmes without loading any dishes.

●Adjust the water hardness setting according to the hardness of the

water in your area.

●Adjust the rinse aid dosage.

NOTE: When using "4 in 1" detergents that integrate also anti-glass

corrosion agent into "3 in 1" formula, please follow the same

instruction as given for "3 in 1" detergents above.

152950 74/0en 2-10-2006 10:25 Pagina 25

Contents

Main Dear customer, CONTENTS Operating instructions Service and Spare Parts Customer Care Department Guarantee Conditions Installation instructions OPERATING INSTRUCTIONS Safety instructions Installation Child safety Your dishwasher in day-to-day use Disposal Economical and ecological dishwashing Description of the appliance Programme selection/cancel button (RESET) Delay start button: The control panel Programme indicator lights Indicator lights: Audible signals Deactivation/activation of the audible signals Prior to using for the first time The water softener a) Setting manually b) Setting electronically Filling with dishwasher salt To fill: Rinse aid Filling with rinse aid Adjusting the dose In daily use Loading cutlery and dishes Page The lower basket The cutlery basket The upper basket In case that plates are loaded in the upper basket: Adjusting the height of the upper basket To move to the higher position proceed as follows: Attention! To lower the basket to the original position proceed as follows: Use of detergent Fill with detergent Different kinds of detergent Detergent tablets Concentrated detergent Use of "3 in 1" combi detergents If you decide to turn back to the use of the standard detergent system we advise that you: Washing programmes ---0,7 _ _ _ _ <0,1 4 Starting a washing programme Setting the "delay start" of a washing programme 4. To interrupt or cancel a washing programme in progress Interrupt a washing programme in progress Cancel a washing programme in progress NOTE: 5. End of the washing programme 6. Unloading the dishwasher Maintenance and cleaning Cleaning the filters Page Prolonged periods of non-operation Frost precautions Moving the machine Something not working ...a fault code appears ...the wash results are not satisfactory The dishes are not clean ...there are problems when operating the dishwasher Page Service and Spare Parts 08705 929929 Customer Care Department Guarantee Conditions Standard Guarantee Conditions Exclusions European Guarantee Technical specifications Installation instructions Building-in Attention! Levelling Fixing to the adjacent units Water supply connections Water inlet hose with safety valve Please take care when installing the water inlet hose: Water outlet hose connection Electrical connection Page Hints for test centres