Starting a Dishwashing Cycle
1.Check that the spray arms can turn freely.
2.Turn the water tap on fully.
3.Close the door.
4.Press the ON/OFF button.
5.Select the desired cycle.
The programme indicator comes on. The remaining time expected for the cycle will be shown in the
The selected cycle will begin after approximately 3 seconds.
3 During the dishwashing cycle, the remaining time shown in the multi- display may be adjusted according to the size of the load, degree of soiling, etc.
Interrupting or Cancelling a dishwashing cycle
Interrupt a dishwashing cycle that is in progress if it is absolutely nec- essary.
Interrupting the dishwashing programme by opening the dishwasher door
1 Hot steam may escape when the door is opened. There is a risk of scald- ing.
1.Open the door carefully. The dishwashing cycle will stop.
2.Close the door. The cycle will continue.
Cancelling the dishwashing cycle
1.Press function buttons 2 and 3 and keep them pressed.
The programme display for the current cycle will flash for several sec- onds and then go out.
2.Release the function buttons. The dishwashing cycle has been can- celled.
3.If you want to start a new cycle, check whether there is any detergent in the dispenser.
3 Turning off the dishwasher will only interrupt a selected dishwashing cycle, not cancel it. The cycle will recommence after turning the dishwasher back on again.
20