Setting the Delay Timer

3 With the delay timer you can delay the start of a dishwashing cycle for between 1 and 19 hours.

1.Press the Delay Timer button repeatedly until the multi-display shows the desired time delay, for example 12h, if the cycle is to start in

12 hours. The Delay Timer indicator is illuminated.

2.Select dishwashing cycle.

3.The time remaining to the start of the cycle is continuously displayed (e. g. 12h, 11h, 10h, … 1h etc.).

To change the time delay:

As long as the cycle has not yet started, you can still change the setting by pressing the DELAY TIMER button.

Cancelling the time delay:

Press the Delay Timer button repeatedly until the length of the selected cycle appears in the multi-display. The selected dishwashing cycle will begin immediately.

To change a dishwashing cycle

As long as the cycle has not yet started, you can still change the dish- washing cycle. First cancel the dishwashing cycle, then re-set the time delay, lastly select the new dishwashing cycle.

Switching off the dishwasher

Do not switch off the dishwasher until the multi-display indicates “0” for the remaining cycle time.

With some dishwashing cycles, the drying fan continues to run even after the end of the cycle.

1.Press the ON/OFF button. All display indicators will go out.

2.Turn off the water tap.

1Carefully open the door. Hot steam may escape.

Hot dishes are sensitive to knocks. Therefore leave the dishes to cool for about 15 minutes before removing them. You also get a better drying result.

Removing the Dishes

3 It is normal for the inner door and the dispensers to be damp.

Empty the lower basket first, then the upper basket. This way you avoid dripping water from the upper basket onto dishes in the lower basket.

21