Leak Prevention System

Installation and Connection Instructions

	Leak Prevention System
	For protection from damage due to water leaks, the dishwasher is
	equipped with a leak prevention system, the AQUA CONTROL SYSTEM.
	In the event of a fault, the safety valve in the appliance immediately
	interrupts the inflow of water and the drain pump is activated. By this
	means water can neither escape nor overflow. The remaining water in
	the appliance is automatically pumped out.
1	The leak prevention system also works when the appliance is switched
	off, the appliance must however not be disconnected from the mains.

Page 39

Image 39

Electrolux 50740 manual Leak Prevention System, Appliance is automatically pumped out

Contents

Favorit Pass them on to any subsequent owner of the appliance Tips on using the applianceDear customer Please read these user instructions carefully Contents Installation and Connection Instructions General Safety Safety InstructionsInstallation, Connection and Placing into Operation Child Safety Correct Use Disposal of Old Appliances DisposalEconomical and Ecological Dishwashing Disposing of the Packaging Material Appliance Features and Control Panel Ning Control panel Panel Prior to using for the first timeAdjust the water softener Your area Ing the appropriate button Dishwasher must be switched offManual setting Electronic setting Turning it anticlockwise Filling with Salt for the Water SoftenerFill with dishwasher salt Remain illuminated Open the door, remove the lower Basket To switch off the control indicator for rinse aid Rinse aidRinse aid can be added in one of two ways Fully open the rinse aid compartment lid Filling with rinse aid Daily Use Adjusting Rinse Aid Dosing Not be washed in the dishwasher Loading Cutlery and Dishes Loading Cutlery Two right-hand plate inserts Loading Pans, Frying Pans Large PlatesFolded over to the left To ease the loading of large items Baskets can be folded across one another Folded across one anotherAcross one another Two rear plate inserts in the lower Loading Cups, Glasses and Coffee Services Adjusting the Height of the Upper Basket Lowering the Upper BasketRaising the Upper Basket Fill with detergent Filling with Detergent General Advice Special AdviceUse of 3 in 1/ Combi Detergent Tablets Detergent tablets Concentrated Detergent Addition Selecting the Wash Programme Programme Table Open the door carefully Start the wash programmeInterrupting or ending the wash programme Washer Pause function Setting or changing the delay start timerSetting the delay start timer Changing the delay start timer Emptying the Dishwasher Care and CleaningSwitching Off the Dishwasher Sive cleaners Stances Cleaning the Filter What to do, if Fault warnings are displayed Dishes are wet and dull There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are still dirty Technical Data Lower rinse aid dosingThere are dried water drops on the glasses and dishes Upper basket Lower basket with cutlery basket Sample loading arrangements Free-Standing Appliances Installing the DishwasherSee enclosed installation instructions Built-Under Dishwasher Work surface must be re-mounted Plinth on free-standing appliances is not adjustable Connect the inlet hose Connecting the DishwasherWater Connection Permitted water pressure Please take care when installing the water inlet hose Water inlet hose with safety valve Water drain Appliance is automatically pumped out Leak Prevention System Changing a fuse Electrical Connection Connections Guarantee Conditions 08705 929 Customer CareCalls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

the appliance is automatically pumped out.