Running a wash cycle
Opening the door/loading washing
1.Open the door: pull the handle on the door.
When the appliance is switched on, the DOOR and START/PAUSE indica- tors show whether the door can be opened:
DOOR indicator | START/PAUSE indicator | Can the door be opened? | |
flashing | flashing | yes, after approx. 2 minutes | |
illuminated | illuminated | no, water level and/or | |
temperature too high | |||
|
| ||
is off | flashing | yes | |
|
|
|
2. Separate washing and load loosely. Mix large and small items. Important: Do not get any washing caught between the door and the rubber seal.
3.Firmly push the door shut. Door catch must audibly click shut.
Adding detergent/conditioner
Important! Only use detergents/conditioners that are suitable for use in domestic washing machines.
Add detergent/conditioner in accordance with the detergent/condi- tioner manufacturer’s instructions. Observe instructions on the packag- ing.
The amount of detergent used depends on:
–the washing’s degree of soiling,
–the load size
–the hardness of the tap water.
•If the manufacturer does not make any recommendations with re- gard to small volumes of washing: for a
•Water softener should be used from water hardness range 2 (=medi- um). The amount of detergent used can then always be that as for hardness range 1 (=soft). Your local water company will provide you with information about water hardness in your area.
11