Interior Parts Installation
7
INTERIOR PARTS INSTALLATION
1. Install the bottom flavor grids in the lower
cutouts and around the igniters. (See Fig. 12)
2. Insert the top row of flavor grids with the 90
degree angled heat shield (bottom side of fla-
vor grid) facing the rear of the unit into cutouts
with triangle ridges facing up. (See Fig. 13-14)
Note: The right side of one flavor grid is
extended. This goes on the far right main
burner, next to the bottom infrared burner.
3. Install cooking grates on the ledges provided
on the grill to create your cooking surface.
(See. Fig. 15)
4. Place warming shelf on support brackets by
setting it flat across brackets allowing the two
holes to line up with the holes on each bracket.
(See Fig. 15)
Fig. 12
Fig. 13
Fig. 14
Bottom flavor grids
in between burners
Faces the back of
the grill
Fig. 15
Cooking Grates
Warming Shelf