Setting the amount of rinse aid required
3 Only change the amount dispensed, if smears, milky spots (reduce the amount) or dried on water spots (increase the amount) can be seen on glasses and dishes. (See section “If dishwashing results are not satisfac- tory”.) The dosage can be set from
1.Open the dishwasher door.
2.Press the release button on the rinse
aid compartment.
3.Open the cover.
4.Set the dosage level.
5. Press the lid shut until it clicks into place.
6. If rinse aid has leaked out, wipe it away with a cloth.
Activating/deactivating the inflow of rinse aid
1.Press the ON/OFF button.
3 If the only LED indicator illuminated is one that belongs to a programme button, this means that this dishwashing cycle has been acti- vated. The dishwashing cycle must be deselected:
Press function buttons 2 and 3 simultaneously for approx. 2 seconds. The LED indicators of all the buttons that can be selected light up.
2.Press function buttons 2 and 3 simultaneously and keep them pressed. The LED indicators for function buttons 1 to 3 will flash.
3.Press function button 2.
The LED indicator for function button 2 will flash. The
0d | Inflow of rinse aid is deactivated |
1d | Inflow of rinse aid is activated (factory setting) |
|
|
4.Pressing function button 2 activates and deactivates the rinse aid dis- pensing function.
5.Once the
11