Connecting the dishwasher34
1WARNING!  Dangerous voltage
(This does apply to dishwashers with safety
valve).
The electrical cable for the safety valve is in
the doublewalled water inlet hose and is
live.
Therefore do not immerse the water inlet
hose or the safety valve in water.

Water drainage

Drain hose
1The drain hose must not be kinked, crushed or entangled.
Connecting the drain hose:
–Maximum permitted height: 1 metre.
–Minimum required height: 40 cm above the bottom edge of the appliance.
Extension hoses
•Extension hoses are available from your lo
cal Service Force Centre. To ensure that the
function of the appliance is not impeded,
the internal diameter of extension hoses
must be 19 mm.
•Extension hoses must not be laid more
than a maximum distance of 4 metres
horizontally; the maximum permitted
height for the connection for the drain
hose is then 85 cm.
Sink outlet connection
•The outlet of the drain hose (ø 19 mm) fits all commonly available sink outlet types.
The outer diameter of the sink outlet connection must be at least 15 mm.
•The drain hose must be fixed to the sink outlet connection using the hose clamp sup
plied.

Antiflood system

For protection from water damage, the dishwasher is equipped with a antiflood sys
tem.
In the event of a fault, the safety valve in the water inlet hose immediately interrupts
the supply of water to the appliance.