Operating instructions
7. End of the washing programme
The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme.
When the washing programme has ended, the optical signal on the floor beneath the dishwasher’s door will turn off.
Open the dishwasher door only when this optical signal turns off.
If the door is not immediately opened at the end of the programme, air will circulate inside the dishwasher to prevent residual steam recondensing on the dishes as water droplets.
This device operates intermittently for about 20 minutes, as long as the dishwasher is switched on.
If the On/Off button is pressed or the door is opened during these 20 minutes, the device will be automatically cancelled.
Open the dishwasher’s door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.
In the digital display appears 0 (remaining programme time), only in this case the programme has ended.
Switch off the dishwasher by pressing the On/Off button.
8. Unloading the dishwasher
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.
Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.
Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler then the dishes.
When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.
32
