Activation/deactivation of the 3 in 1 function(The dishwasher must be switched off)
1. Press the On/Off button. The indicator lights of the programme
selection buttons will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated this means that a washing programme is set.
The programme must be cancelled: press simultaneously
function buttons 2and 3for about 2 seconds, the indicator light
of the set programme button starts flashing.
After about 2 seconds the indicator lights of all the programme
selection buttons will illuminate, this means that the set washing
programme has been cancelled and the machine is now in
setting mode.
2. Press simultaneously function buttons 2and 3, until the indicator
lights of function buttons 1, 2, 3and 4start flashing.
3. Press function button 4, the indicator lights of function
buttons 1, 2and 3turn off while the indicator light of function
button 4goes on flashing.
4. Press function button 4 again, the “3 in 1” indicator light
illuminates, indicating that the “3 in 1 function” is active.
To deactivate the function press function button 4again, the
indicator light turns off.
5. To memorise the operation, switch off the dishwasher by pressing
the On/Off button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.
Operating instructions
10
3 in 1 function active indicator light on
3 in 1 function not active indicator light off
152955 33/0en 31-03-2005 9:07 Pagina 10