Water inlet hose with safety valve | Electrolux 65080 VIL instruction

Installation instructions

Water inlet hose with safety valve

After connecting the double-walled water inlet hose, the safety valve is next to the tap. Therefore the water inlet hose is only under pressure while the water is running. If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water.

Please take care when installing the water inlet hose:

-The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water.

-If water inlet hose or the safety valve is damaged, remove the mains plug immediately.

-A water inlet hose with safety valve must only be replaced by a specialist or by the Service Force Centre.

-Place the water inlet hose in such a way that it is never higher than the bottom edge of the safety valve.

46

Image 46

Electrolux 65080 VIL manual Water inlet hose with safety valve, Please take care when installing the water inlet hose

Contents

Favorit 65080 VIL Following symbols are used in the text Dear customer Contents Installation Safety instructionsChild safety Your dishwasher in day-to-day use Disposal Economical and ecological dishwashing Description of the appliance Control panel Digital display indicates 1 function Indicator light off 1 function active Indicator light onActivation/deactivation of the 3 in 1 function Activation/deactivation of the rinse aid dispenser Deactivation/activation of the audible signals Audible signalsFactory setting audible signals activated Prior to using for the first time Water softener Setting manually Setting electronically Example Examples Filling with dishwasher salt To fill Filling with rinse aid Rinse aidEnsure that the lid is closed after every refill Adjusting the dose Daily use Loading cutlery and dishes Glazed patterns may fade if machine washed frequently Lower basket Cutlery basket Upper basket Case that plates are loaded in the upper basket Adjusting the height of the upper basket To move to the higher position proceed as follows Use of detergent Fill with detergent Concentrated detergent Different kinds of detergentDetergent tablets Combi detergents Special advice General adviceUse of 3 in 1 combi detergents Washing programmes Programme Setting and starting the programme with the delay start Setting and starting the programmeStarting a washing programme To cancel a delay start in progress To interrupt or cancel a washing programme in progressCancel a washing programme in progress End of the washing programme Unloading the dishwasher Maintenance and cleaning Cleaning the filters Never try to remove the upper spray arm Prolonged periods of non-operation Frost precautionsMoving the machine Flashing fault code appears Something not working There are problems when operating the dishwasher Dishes are wet and dull Dishes are not cleanWash results are not satisfactory Water drops have dried onto glasses and dishes Service Customer Care Department Service and Spare Parts08705 This guarantee does not cover Guarantee ConditionsStandard Guarantee Conditions Exclusions European Guarantee Technical specifications Electrical connection Levelling Building-inFixing to the adjacent units Water supply connections Water inlet hose with safety valve Please take care when installing the water inlet hose Water outlet hose connection Brown Live Electrical connectionGreen and Yellow Earth Blue Proceed as follows Installation instructions Hints for test centres Page Postfach 90327 Nürnberg Copyright by AEG