Electrolux 66331KF-N Switching the STOP+GO function on and off, Step, Touch, Control panel

Operating the appliance
	11

Switching the STOP+GO function on and off

The STOP+GO function simultaneously switches all cooking zones that are switched on to the keep warm setting and then back to the heat setting that was previously set.

	Control panel	Display
To switch on	Touch
To switch off	Touch	heat setting that was previously
		set (not automatic warm up func-
		tion)

3Timer functions are not stopped by STOP+GO.

3STOP+GO locks the whole control panel except the sensor field .

Using the automatic warm-up function

All cooking zones are equipped with an automatic warm-up function. When set- ting a heat setting using the automatic warm-up function, the cooking zone switches to full power for a certain amount of time and then automatically switches back to the heat setting set.

Step	Control panel	Display
1.	Touch

2.Move your finger down from to se- / ,

lect the desired heat setting between	after 5 seconds .
and	As long as		is displayed,
	the appliance works at full
	power.
	After the automatic warm
	up is completed, the heat
	setting	/	is dis-
	played again.

The length of time that the automatic warm up function operates depends on the heat setting selected.