![](/images/new-backgrounds/1086899/8689919x1.webp)
Switching the STOP+GO function on and off
3
3
The STOP+GO function simultaneously switches all cooking zones that are switched on to the keep warm setting and then back to the heat setting that was previously set. This function can be used to briefly in- terrupt and then continue the cooking process e.g. to take a telephone call.
| Control panel | Display | |
To switch | Touch STOP+GO | u | |
on |
|
| |
|
|
| |
To switch | Touch STOP+GO | heat setting that was previ- | |
off |
| ously set (not automatic | |
|
| warm up function) | |
|
|
|
Timer functions are not stopped by STOP+GO.
STOP+GO locks the whole control panel except the sensor field .
Using the automatic warm-up function
Step | Control panel | Display |
1. | Setting the level Ç / p | Ç / p |
|
|
|
2. | Place to one side for a moment | Ç / p |
3. | touch | a |
4. | touch in order to set the de- | Æ until ¿ / u |
| sired cooking setting | after 3 seconds a |
|
|
|
All cooking zones are equipped with an automatic
3 If during the automatic warm up a a higher heat setting is selected, e.g. from Á to Ã, the automatic warm up is adjusted.
3 If there is still residual heat on the cooking zone (display h), the auto- matic warm up is not performed.
10