What to do if...

Remedying small faults yourself

If during use of the appliance one of the following error codes is shown in the multi-display:

–E10 (Problems with the water inflow),

–E20 (Problems with the water outflow),

–E40 (door open),

please consult the following table.

After the error has been remedied, press the START/PAUSE button.

In the event of other errors (E and a number or letter): Switch the appliance off and then on again. Set the programme again. Press the START/PAUSE button.

If the error appears again, please contact your local Service Force Cen- tre, stating the error code.

Problem

Possible cause

Remedy

 

Power plug not plugged in

Connect the plug to a mains

 

or problem with the fuse.

socket. Check the fuse.

Washing machine does

The door is not shut proper-

Close the door until the lock

ly.

audibly clicks into place.

not work.

 

 

 

The START/PAUSE button

Press the START/PAUSE but-

 

was not pressed for long

ton for a longer period of

 

enough.

time.

The door cannot be

The child safety device is ac-

Deactivate the child safety

closed.

tivated.

device:

When you press a but-

The selected function can-

 

ton Err appears in the

not be used together with

Select another function.

multi-display.

the wash programme set.

 

E40 appears.

 

 

The END indicator is

The door is not closed prop-

Close the door properly. Re-

flashing 4 times, and si-

multaneously an acous-

erly.

start the programme.

tic signal is sounding 4

 

 

times.

 

 

 

 

 

19