3 Special spanner A and sealing caps B (2 units) and C (1 unit) come with the appliance.

3.Use special spanner A to remove screw D and the compression spring.

4.Use sealing cap C to cap the hole.

5.Use special spanner A to remove the two screws E.

6.Use special spanner A to remove the four screws F.

7.Remove transit bar G.

8.Screw in the four screws F again.

9.Use sealing caps B to cap the two large holes.

Important: Press all sealing caps B (2 items) and C (1 item) in firmly so that they snap into the rear wall.

27