Electrolux 76639 Starting the washing program, Washing Program Progress, Program progress display

Operating Instructions

Starting the washing program

0 1. Check that the water tap is open.

2.Start the washing program:

Press the START/PAUSE button

The washing program is started or starts at the end of the time delay set.

3	If the DOOR display flashes red when the START/PAUSE button is
	pressed, the door is not properly closed.

– The display DOOR flashes red

– The error code E40 then flashes in the multi display

– And the MAIN WASH display flashes.

In this case, press the door firmly closed and again press the START / PAUSE button.

If the delay timer has been set:

The start time delay set on the time delay counts down; the time remaining until the program starts is displayed in the multi-display (in hours remaining, e.g. 5h). During this time you can add washing and change or stop the delay timer.

• Load the washing: Press the START/PAUSE button. The door can be opened. Then close the door and press the START/PAUSE button again.

• Changing or stopping delay timer: Press the DELAY TIMER button repeatedly until the desired time is displayed. When the program duration is displayed (display in minutes e. g.129) the washing program starts without delay.

Washing Program Progress

Program progress display

Prior to the start, the program steps chosen are displayed by the Program progress display. During the washing program the current program step is displayed.

22