|
|
| Operating Instructions | |
|
|
|
|
|
| Problem | Possible Cause | Remedy |
|
| The rinsing water is | The cause is probably a | No negative effect on the |
|
| detergent with a high silicate | rinsing results, use a liquid |
| |
| cloudy. |
| ||
| content. | detergent if necessary. |
| |
|
|
| ||
| When pressing a pro- | The selected program option |
|
|
| gram option button |
|
| |
| cannot be combined with the | Make another selection. |
| |
| the corresponding dis- |
| ||
| set program. |
|
| |
| play does not light up. |
|
| |
|
|
|
| |
|
|
|
|
|
If the washing results are not satisfactory
If the washing turns greyish and limescale deposits are present in the drum
•Insufficient detergent has been added.
•Incorrect detergent was used.
•Stains were not
•Program or temperature was not set correctly.
•If using modular detergents, the individual components were not used in the correct ratio.
If there are still grey stains on the washing
•Soiled garments with ointments, grease or oils were washed with insufficient detergent.
•The temperature selected for the wash was too low.
•A frequent cause is that fabric softener - particularly a concentrated one - has come into contact with the washing. Wash out these types of stains as soon as possible and use the fabric softener carefully.
If after the last rinse foam is still visible
•Modern detergents can still cause foam in the final rinse cycle. How- ever, the washing is still sufficiently rinsed.
If there are white residues on the washing
•These are insoluble contents of modern detergents. They are not the result of an insufficient rinse. Shake out the washing or brush it off. Turn the washing inside out before washing it. Review your choice of detergent and if necessary use liquid detergent.
33
