Operating Instructions
Opening and closing the door
0 Open: Pull the handle on the door.
0Close: Press the door firmly closed.
The displays DOOR and START/PAUSE show when the appliance is switched on whether the door can be opened:
| DOOR Indicator | Display START/PAUSE | Door opening possible? |
| lights up green | flashes red | yes |
| lights up green | lights up red | yes, after the START/PAUSE |
| key is pressed | ||
|
|
| |
| is off | flashes red | no1) |
| or lights up red | ||
|
|
| |
|
|
| |
| 1) The door is locked because of a high water level or high temperature | ||
3 | If |
|
|
| – the display DOOR flashes red, |
| |
–then the error code E40 flashes in the multi display,
–and the MAIN WASH display flashes,
an attempt was made to start a washing programme without the door being correctly closed. In this case, press the door firmly closed and start the washing programme again.
Loading the washing
3 | See "Programme Tables" for maximum loads. |
| For information about the correct preparation of the washing see "Sort |
and prepare washing".
01. Sort and prepare the washing according to type.
2.Open the door: Pull the handle on the door.
3. Load the washing.
Important! Do not trap washing when closing the door. The fabrics and the ma- chine could be damaged.
4. Close the door firmly.
21
