Electrolux 76650 A3 user manual Machine vibrates or is noisy, No water is visible in the drum

		What to do if…
			29
Problem		Possible cause/Solution
		The transit bolts and packing have not been re-
		moved.
		• Check the correct installation of the appli-
		ance.
The machine vibrates or is noisy:		The support feet have not been adjusted
		• Check the correct levelling of the appliance.
		The laundry is not evenly distributed in the
		drum.
		• Redistribute the laundry.
		Maybe there is very little laundry in the drum.
		• Load more laundry.
		The electronic unbalance detection device has
		cut in because the laundry is not evenly distrib-
		uted in the drum. The laundry is redistributed
		by reverse rotation of the drum. This may hap-
Spinning starts late or the machine does not		pen several times before the unbalance disap-
		pears and normal spinning can resume. If, after
spin:		some minutes, the laundry is still not evenly
		distributed in the drum, the machine will not
		spin.
		• The laundry load is perhaps to little, add
		more items, redistribute the load manually
		and then select the spinning programme.
		The machine is fitted with a type of motor
		which makes an unusual noise compared with
The machine makes an unusual noise:		other traditional motors. This new motor en-
		sures a softer start and more even distribution
		of the laundry in the drum when spinning, as
		well as increased stability of the machine.
No water is visible in the drum:		Machines based on modern technology operate
		very economically using very little water with-
		out affecting performance.
		Anti-flooding system has activated.
The display shows the alarm code	:	• Disconnect the appliance, close the water tap
		and contact the Service Force Centre.