8
Display (7)
7.1 | 7.2 |
| 7.3 |
7.5 |
|
| 7.4 |
7.1Child safety lock symbol
• Duration of selected programme: after selecting a programme, the duration is dis- played in hours and minutes (for example 2.05). The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric. After the pro- gramme has started, the time remaining is updated every minute.
• Alarm codes: in the event of operating problems, some alarm codes can be displayed, for example E20 (see chapter «What to do if...»).
• End of programme: when the programme has finished a blinking zero 
is displayed, the symbol 7.5 (Door locked) disappears on the display, the pilot light of button 8 goes out and the door can be opened.
• Incorrect option selection: if an option which is not compatible with the set wash pro- gramme is selected, the message Err is displayed for a few seconds and the yellow pilot light of button 8 light starts blinking.
• Delay Start: the selected delay (20 hours max) set by the relevant button appears on the display for a few seconds, then the duration of the previously selected programme is dis- played. The symbol 7.3 will appear on the display. The delay time value decreases by one unit every hour. When only 1 hour remains, the time decreases every minute.
7.3Delay Start - symbol
7.4Programme progress display: the display shows the different washing programme phases. After the appliance starts operating, the display show the relevant symbol of the
washing phase which is running: 
= WASHING, 
= RINSING, 
= DRAINING, 
= SPINNING - symbols
7.5Door lock symbol
This symbol indicates if the door can be opened:
• symbol on: the door cannot be opened. The appliance is running or the appliance has stopped with water left in the tub.
• symbol off: the door can be opened. The washing programme is finished.
