Electrolux 76669 manual If the Easy Iron programme has been selected, Wash

Operating Instructions

If the EASY IRON programme has been selected:

For EASY IRON, following the end of the programme an anti-crease phase of approx. 30 minutes is performed. During this time the multi- display shows the time remaining (e.g. 1 minute) and the END display will illuminate.

You can remove the washing at any time during the anti-crease phase.

01. To do this, press the START/PAUSE button

The door can now be opened and the washing removed.

2.Then turn the programme selector to OFF. The wash programme has ended.

3	If the OVERDOSING indicator illuminates, then too
	much detergent was used in the washing programme
	just completed. Observe the dosing recommendations
	of the detergent manufacturer as well as the load quantity for the next
	wash.

Important! If the washing machine is not to be used for a long period: Close the water tap and disconnect the washing machine from the electricity mains.

26