Operating Instructions
Problem | Possible Cause | Remedy | |
| Water tap is closed. | Open the water tap. | |
|
| Close the water tap. Unscrew | |
No water flows. | Filter in screw connection of | the hose from the tap, re- | |
the inlet hose is blocked. | move the filter and clean un- | ||
Fault code (1 appears. | |||
|
| der running water | |
| Water tap is blocked with | Check the water tap and | |
| limescale or is faulty. | have it repaired if necessary. | |
| The transport packaging has | Remove transport packaging | |
| according to the installation | ||
| not been removed. | ||
| and connection instructions. | ||
|
| ||
|
| Adjust the feet according to | |
| The machine is not level. | the installation and connec- | |
|
| tion instructions. | |
The washing machine | There is very little washing in | This does not impair the op- | |
vibrates during opera- | |||
tion or is unstable. | the drum (e.g. only one | eration of the machine. | |
dressing gown). | |||
|
| ||
| The water could not be com- | Check the the drain hose and | |
| remove any kink if necessary, | ||
| pletely pumped out before | or clean the drain pump and, | |
| spinning because the drain- | ||
| if required, remove foreign | ||
| age hose is kinked or the | ||
| bodies from the pump hous- | ||
| drain pump is blocked. | ||
| ing. | ||
|
| ||
|
| It may be necessary to re- | |
Excessive foaming dur- | Probably too much detergent | duce the amount of deter- | |
gent used. Follow the | |||
ing the main wash. | was used. | detergent manufacturer's | |
|
| ||
|
| recommendations. | |
|
|
|
32