Electrolux 76825 manual Starting a programme, Programme sequence, Interrupting a programme

Starting a programme

1.Check that the tap is turned on.

2.Select a programme.

3.Press the START/PAUSE button. The programme is started, or will start after the delay timer has counted down.

3If after pressing the START/PAUSE button E40 flashes in the multi-dis- play, the END indicator flashes 4 times and at the same time an acous- tic signal sounds 4 times, the door has not been correctly shut. Push the door firmly closed and press the START/PAUSE button again.

Programme sequence

•The programme progress display shows the programme step that is currently being carried out.

•The multi-display shows the estimated time remaining (in minutes) until the end of the programme.

3The time remaining can increase or stay the same for a while during the course of the cycle as the programme adjusts itself to various condi- tions (e.g. type of washing and quantity, out of balance spin detection, special rinse cycle, etc.).

Interrupting a programme/adding washing

Interrupting a programme

•A programme can at any time be interrupted by pressing the START/ PAUSE button and resumed by pressing START/PAUSE again.

•To cancel a programme before it has ended, turn the programme se- lector to OFF. Important: Be careful of water in the appliance.

Adding washing

Washing can be added, as long as the DOOR indicator is illuminated green.

1.Press the START/PAUSE button. The door can be opened.

2.Close the door and press the START/PAUSE button again. The pro- gramme will continue.

15