10Maintenance
Cleaning (continued)
1.Pull out trash bucket until it stops.
2.Remove (1) screw from each of the bucket slides.
3.Press down on left and right bucket slide release tabs while pulling the bucket out of the unit.
4.Vacuum and clean cabinet base, track channels, and bucket, particularly in corners.
5.Wash the cabinet interior with a mild detergent solution.
6.When finished cleaning the cabinet, install the trash bucket by reversing steps 2 and 3.
CLEAN compaction plate
ram
release tab
compaction
plate
1.The ram is equipped with a compaction plate that can be removed for easy cleaning.
2.Make sure the trash bucket is empty and without a bag.
3.Push the trash bucket into the cabinet. Unlatch and lower the bucket front.
4.Press the compaction plate release tab on the front of the ram to disengage the plate. The plate can be removed by pulling down and away from the ram.
5.Once removed the compactor plate can be washed in a mild detergent solution or placed in a dishwasher.
6.
Cleaning (continued)
CLEAN ram
trash
bucket
ram
1.Make sure the trash bucket is empty and pushed into the cabinet.
2.Turn the Key Lock Switch to “ON” position.
Key Lock Switch
3. Select the “Hold” compact mode.
Hold Compact Mode
4. Press the “Start” button.
Start Button
5. Close the door.
The ram will travel downward into the trash bucket and stop at the bottom of its stroke.
Glass fragments and other sharp trash pieces may be on or around the surfaces to be cleaned. Carefully remove these objects before wiping down any surfaces.
6.Open the door. Unlatch and lower the bucket front. Vacuum top of ram and clean with a mild detergent solution.
7.When finished cleaning: Raise and
