Electrolux ARCTIS operating instructions Electrical Connection

Installation

Electrical Connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

1 WARNING – THIS APPLIANCE MUST BE EARTHED

The manufacturer declines any liability should these safety measures not be observed.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is inside, on the left.

The appliance is supplied with a 13 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.

Important

The wires in the mains lead are coloured in accordance with the follow- ing code:

Green and Yellow Earth			Green
			& Yellow
Blue	Neutral
Brown	Live
As the colours of the wires in the
mains lead of this appliance may
not correspond with the coloured
markings indentifying the termi-		Blue	Brown
nals in your plug, proceed as fol-
lows:
1. The wire coloured green and
yellow must be connected to			Cord Clamp
the terminal marked with the
letter “E“ or by the earth sym-
bol	or coloured green and yellow.

2.The wire coloured blue must be connected to the terminal “N“ or coloured black.

3.The wire coloured brown must be connected to the terminal marked “L“ or coloured red.

4.Upon completion there must be not cut, or stray strands of wire present and the cord clamp must be secure over the outer sheat.

1Warning! A cut-off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut-off plug is disposed of safely.

818 19 26-00/0 11