![](/images/new-backgrounds/1041226/4122637x1.webp)
Initial use
01. Insert plug into mains socket.
2.Press ON/OFF button. The green pilot light illuminates. The compressor starts and then runs automatically.
A warning tone sounds and the red warning light flashes indicating that the required storage temperature has not yet been reached.
3.Press the WARNING OFF button to switch off the warning tone.
4.Set temperature to
Important! Wait until the freezer compartment has reached a tempera- ture of
Temperature Adjustment
01. Press either the „+“ (WARMER) or
The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display.
2.To adjust to a warmer temperature, press the „+“ button. To adjust to a colder temperature, press the
The temperature is adjusted by one display field with each press of a button.
Note: From a food safety point of view,
3 If the buttons are not pressed again for approx. 5 seconds the tempera- ture display will change from the DESIRED temperature to the ACTUAL temperature. The display changes from flashing to continuous illumina- tion.
Important! Please check red warning display and temperature display regularly to assure maintenance of the storage temperature.
818 19 | 19 |