Electrolux B9831-5 Oven Ceiling, Folding down the heating element, Installing the heating element

Models: B9831-5

1 32
Download 32 pages 45.74 Kb
Page 21
Image 21

Care and cleaning 21

2.Pull the rear shelf support rail away from the side wall and remove it.

2

1

Installing the shelf support rails

Install the shelf support rails in opposite sequence.

Important! The rounded ends of the shelf support rails must point to the front!

Oven Ceiling

You can fold down the heating element on the oven ceiling to clean the oven ceiling easily.

WARNING!

Before you fold down the heating element switch off the appliance. Make sure that the appliance is cold.

There is a risk of burns!

Folding down the heating element

1.Remove the shelf support rails.

2.Hold the heating element with the two

hands at the front

3. Pull it forwards against the spring pres- sure and out along the support on both sides.

4.The heating element folds down. The oven ceiling is ready to clean.

Installing the heating element

1.Install the heating element in opposite sequence.

Install the heating element correctly on the two sides above the support on the inner wall of the oven.

2. Insert shelf support rails.

Oven lamp

WARNING!

There is a danger of electrical shock!

Before you change the oven lamp:

Switch off the oven.

Remove the fuses in the fuse box or switch off the circuit breaker.

Page 21
Image 21
Electrolux B9831-5 user manual Oven Ceiling, Folding down the heating element, Installing the heating element