1.Place the packed food in the drawers. Place food to be frozen in the upper drawer. Unfrozen food must not touch items already frozen, otherwise the frozen food could begin to defrost.
2.When freezing fresh food, depress the ambient temperature switch (A) 12 hours before loading the food without modifying the thermostat setting. The pilot light will come on. At the end of the freezing process, do not for- get to depress again the ambient switch in order to avoid an increase of the power consumption.
3.Place frozen foods in the drawers sorted by type, as far as possible.
4.If large quantities of food are to be stored, remove all drawers and baskets
from appliance and place food on cooling shelves. Pay careful attention not
to exceed load limit 
stated on the side of the upper section
Ice pack
There are two ice packs in one drawer of the freezer.
In the event of a power failure or malfunction, the ice pack will lengthen the amount of time it takes for the frozen food to become too warm by several hours. The ice pack can only fulfil this task efficiently if it is placed in the uppermost drawer, at the front, above the frozen food. You can use the ice pack for cooling cold bags.
Preparation of Ice Cubes
1.Fill the ice cube tray 3/4 full with cold water, place it in the freezer com- partment and leave to freeze.
2.To loosen the frozen cubes, either twist the ice cube tray or hold it under running water for a few seconds.
Important! Never try to free an ice tray that is frozen to the freezer com- partment using pointed or sharp edged objects. Use the ice scraper supplied.
10
