Manuals / Electrolux / Kitchen Appliance / Freezer

Electrolux C 6 18 41 i installation instructions Instructions for building-in

Models: C 6 18 41 i

1 28

Download 28 pages 59.57 Kb

Page 21

Image 21

Instructions for building-in

Apply joint the sealing strip as shown in figure.

Push appliance into the housing until stop strip (A) touches the kitchen unit.

D765

D023

Open the door and push the appliance against the side of the kitchen unit op- posite to that of appliance hinges.

Fasten the appliance with 4 screws provided in the kit included with the appliance. Snap ventilation grille (C) and hinge cover (D) into position.

	D
D723	C

Page 21

Image 21

Electrolux C 6 18 41 i Instructions for building-in, Apply joint the sealing strip as shown in figure

Contents

SANTO C 6 18 41 Integrating Fridge Freezer Operating and Installation InstructionsDear customer Safety ContentsService and Spare Parts Guarantee Conditions Storage Goods Symbols/ Freezing calendarSafety of children SafetyIntended use Prior to initial start-upDisposal ServiceDaily Operation Appliance Packaging InformationRemove transport packaging Description of the applianceDisposal of old Appliances Starting up and temperature regulation Setting “0” OffAmbient Temperature switch For safety, store in this way only one or two days at the most Interior AccessoriesFresh food refrigeration Storage ShelvesFreezing and storing frozen food Preparation of Ice Cubes Ice packDefrosting Storage Goods Symbols/Freezing CalendarRefrigerator FreezerSwitching off the appliance Cleaning and CareIf the appliance is not going to be used for an extended period Energy Saving Tips Do not set temperature any colder than necessary Something Not WorkingSymptom Do not leave the door open any longer than necessaryChanging the light bulb 0870 5 Service and Spare PartsHelp us to help you Customer Care DepartmentGuarantee Conditions Guarantee ConditionsEuropean Guarantee Installation Electrical ConnectionWARNING - THIS APPLIANCE MUST BE EARTHED Your appliance needs air Installation LocationReversing the door Attention keep ventilation openings clear of obstruction1. Unscrew the upper pin and remo- ve the spacer Housing dimensions2. Remove the upper door HeightApply joint the sealing strip as shown in figure Instructions for building-inSeparate parts A, B, C, D as shown in the figure Apply covers B into the relevant holes50mm D726Fix cover C on guide A until it clips into place Regulations, Standards, Guidelines Page Page Page 2222