Place guide (A) on the inside part of the furniture door, in the upper and lower positions as shown in the fig- ure and mark the position of external holes. Having drilled the holes, fix the guide with the screws supplied.
Fix cover (C) on guide (A) until it clips into place.
Open the appliance door and the fur- niture door at 90°. Insert the small square (B) into guide (A). Put togeth- er the appliance door and the furni- ture door and mark the holes as indi- cated in the figure. Remove the squares and drill holes with ø 2 mm at 8 mm from the outer edge of the door. Place the small square on the guide again and fix it with the screws supplied.
50mm | A |
PR166 |
|
| A |
C |
|
PR33 |
|
| 8mm |
| A |
PR167 | B |
|
25
