Electrolux C 718 40-4i installation instructions Energy Saving Tips, Something Not Working

Models: C 718 40-4i

1 28
Download 28 pages 5.47 Kb
Page 15
Image 15

3.Clean the appliance and the inte- rior accessories with lukewarm water and with a little bicarbonate of soda added (5ml to 0,5 litre of water).

4.Dry the appliance thoroughly.

5.Check the water drain hole on the rear wall of the fridge. Clear a blocked drain hole with the aid of the drain cleaning tool included with the appliance.

D037

6.When everything is dry switch the appliance back on.

Energy Saving Tips

Do not install the appliance near radiators or other sources of continuous warmth. High ambient temperatures cause longer, more frequent opera- tion of the compressor.

Ensure sufficient air circulation at the appliance base and at the back wall of the appliance. Never cover air vent openings.

Do not place warm foods into the appliance. Allow warm foods to cool first.

Do not leave the door open any longer than necessary.

Do not set temperature any colder than necessary.

Put frozen food in the fridge to defrost. The cold in the frozen food will then be used to cool the fridge.

Something Not Working

If the appliance is not functioning correctly, please carry out the following checks before contacting your local AEG Service Force Centre.

Warning!

Repairs should only be carried out by qualified service engineers. Repairs carried out by inexperienced persons may cause injury or serious malfunc- tioning.

15

Page 15
Image 15
Electrolux C 718 40-4i Energy Saving Tips, Something Not Working, When everything is dry switch the appliance back on