Electrolux DFKTWC75GS installation instructions Ducted CONFIGURATIONNON- Ducted Configuration

Installation 11

DUCTED CONFIGURATIONNON- DUCTED CONFIGURATION

1.Install the discharge collar into the duct connector of the range hood. Fig. 6.

DISCHARGE

COLLAR

DUCT

CONNECTOR

FIG. 6

NOTE

The following materials must be purchased separately for non-ducted recirculation installations:

Non - Ducted Recirculation Kit, Model DFKTWC75GS. 5” diameter duct.

1.Discard discharge collar/damper supplied with the hood. Install the 5” to 6” adapter supplied with the Non-Ducted Recirculation Kit (Fig. 7).

2.Secure the plenum to the flue mounting bracket with (2) 3.9x6mm flat head screws (the screws are supplied with the Non-Ducted Recirculation Kit “DFKTWC75GS”). Fig. 8.

	5”-6”
	ADAPTER
	FIG. 7
3.9x6mm	FLUE MOUNTING
FLAT HEAD	BRACKET
SCREWS

PLENUM

FIG. 8