Removing the hood from cabinet

Follow these steps:

Remove the grease filter.

Remove the 4 additional screws from the frame.

Loosen the screws on the two fixing springs. Fig. 9.

Fig. 9

Push a flat screwdriver into the hole for the fixing springs (right and left) and push each of the fixing springs inwards. Fig. 10.

At the same time, pull the extractor hood (right and left) out of the cabinet.

Re-install it as described above.

Fig. 10

17

Page 17
Image 17
Electrolux CHDL 4150, 5708 D, 570 D, DL 6250 installation instructions Removing the hood from cabinet, Follow these steps