Electrolux DX303 - page 33

installation electrolux 33
Electrical connection
Safety standards require the
appliance to be earthed. Prior to
using the appliance for the first
time, ensure that the rated voltage
and type of supply on the rating
plate match that of the supply
where the appliance is to be
installed.The electrical rating data
is found on the rating plate.
Always plug the mains plug into a
correctly installed approved socket.
Multi-way plugs,connectors and
extension cables must not be used.
This could constitute a fire hazard
through overheating.
If necessary,have the domestic
wiring system socket replaced.If
the electrical supply cord has to be
replaced, contact your local
Customer Care centre.
The plug must be accessible after
the appliance has been installed.
Never unplug the appliance by
pulling on the cable. Always pull
the plug.
The manufacturer accepts no
liability for failure to observe the
above safety precautions.
117994350.qxp 12/20/2006 5:46 PM Page 33