Cancelling the "delay start"
To cancel a delay start in progress
you have to reset the dishwasher.
Simultaneously press and hold the
two program buttons positioned
over the word Cancel, until all the
program lights illuminate.
Cancelling a delay start also
cancels the selected washing
program.In this case you have to
set the washing program again.
Interrupt or cancel a washing
program in progress ONLY if it’s
absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Interrupt a washing program in
progress:
Open the dishwasher door; the
program will stop.Close the door;
the program will start from the
point at which it was interrupted.
Press the On/Off button, all lights
will turn off.Press the On/Off
button again;the program will star t
from the point at which it was
interrupted.
Cancel a washing program in
progress
Simultaneously press and hold the
two program buttons positioned
over the word Cancel, until all the
program lights illuminate.The
washing program has been
cancelled.
If a new washing program is to be
selected, check that there is
detergent in the detergent
dispenser.
End of the washing program
The dishwasher will automatically
stop.
The Ready indicator light will
illuminate.
The light of the program just ended
will remain on.
The digital display shows zero.
1. Switch off the dishwasher by
pressing the On/Off button.
2. Open the dishwasher door, leave it
ajar and wait a few minutes before
removing the dishes;in this way
they will be cooler and the drying
will be improved.
20 electroluxdaily use
117994350.qxp 12/20/2006 5:46 PM Page 20