Installation 17
Connecting the Plumbing (E24CM76GSS)
Warning
•To prevent damage to the coffee system due to hard water, prior to installation, check the water hardness for the building where you will be installing the coffee maker. See page 12
•To avoid leaks, do not overtighten fittings.
•Insert the 3/4” gasket into the 3/4” fitting on the water supply hose. Make sure it is properly seated.
•Connect the 3/4” end of the hose to the water inlet on the back of the coffee maker.
•Insert the 1/4” gasket into the 1/4” fitting on the water supply hose. Make sure it is properly seated.
•Connect the other end (1/4”) of the hose to the water supply.
Back of Coffee
Maker
Water Inlet
Power Cord
Gasket
Water Supply
Hose
