Safety

General Safety Precautions (continued)

Warning

Do not tamper with the controls.

Clean the coffee maker thoroughly according to the Flushing Out the Coffee Maker section in the use and care guide before operating it for the first time.

When installing or cleaning the mechanical parts of the coffee maker, exercise care with hands and arms around the metal edges.

Many metal surfaces behind the front panel and inside the brewing compartment are hot when power is on. Exercise care around metal surfaces in these areas when the power switch is in the on position.

During normal operation, the person using the coffee maker must pull it out from the cabinet to fill the coffee bins, etc. To prevent personal injury, when pushing the coffee maker back into the cabinet, make sure body parts and clothing are clear of the portion of the coffee maker behind the front panel.

To prevent an electrical shock hazard due to steam and water leakage, do not install this appliance above or below any other appliance.

caution

To prevent jamming of the grinding mechanism, use only the types of coffee beans specified in these instructions.

Remove the drip tray before closing the front panel door. Closing the front panel door without the drip tray removed could damage parts of the coffee maker.

Keep the coffee maker keys in a safe place. Replacement keys are not covered by the warranty.

To prevent property damage, the back of the cabinet must be ventilated. See the location planning section.

Clean and flush the coffee maker according the the Routine Cleaning Instructions in the use and care guide before using this appliance.

Page 6
Image 6
Electrolux E24CM76GSS installation instructions General Safety Precautions