Electrolux EDC 77550W Incorrect option selection, Filter cleaning light, Alarm code, Drying

This symbol appears on the dispay that the appliance is in the cooling phase. At the end of drying, there is a 10 minute cooling phase to cool the laundry.

“Long Anticrease”

This symbol appears on the dispay at the end of the cooling phase, during the anti-creasing phase and at the end of the programme.

Indicator lights

These lights indicate the following functions:

“Water reservoir full” light

This light comes on at the end of the

12electrolux use

0.00	programme to remind you that the water
	reservoir must be emptied out. If this light
	illuminates during a programme this means
	that the water reservoir is full. The buzzer
	sounds, the programme stops, the light of
Incorrect option selection	the Start/Pause button flashes.
If you select an option that is not compatible	“Filter cleaning” light
with the programme you have selected,	It comes on every 80 cycles to remind you
the display shows Err (error).	that the condenser must be cleaned.
	“Condenser cleaning” light
	This light illuminates at the end of the
	programme to remind you that the
	filters must be cleaned.
This code will reappear during the execution of	At the end of the programme
the programme if you press one of the option
	All drying programmes end with a 10
buttons or turn the programme selector.
	minute cooling phase.
Alarm code
	You may remove the laundry after this
In case of a functional anomaly, the display
	phase. The lights		and	, and illu-
shows an alarm code (e.g. E21).
	minate.
E.27	The display shows a static zero.
	If the laundry is not removed at the end
	of the cycle, the dryer performs an anti-
	creasing phase (duration: 30 minutes
“Drying”	maximum). If you do not remove the
	laundry, the dryer will stop automatically
This symbol appears on the dispay that
	at the end of the anti-creasing phase.
the appliance is in the drying phase.	Lights	and	remain lit and the
“Cooling”		buzzer sounds for 2 minutes.

If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.

Turn the programme selector dial to “O” to switch the machine off. Remove the laundry from the drum and carefully check that the drum is empty. The appli- ance is switched off.

Remove the laundry.

If you open and then close the door before turning the selector dial to “O” all the lights corresponding to the phases making up the performed programme come on.

After each use