Electrolux EDC 77550W user manual Door reversal, Electrical connection

Models: EDC 77550W

1 60
Download 60 pages 15.1 Kb
Page 27
Image 27

Door reversal

To make it easier to load or unload the laundry the door can be reversed. Reversing the door is not possible if after this operation the appliance result installed behind a door with a hinge on the opposite side to that of the appliance

This operation must be carried out by qualified personnel.

Please contact the nearest Service Centre.

installation electrolux 27

Electrical connection

This machine is designed to operate on a 220-230 V, single-phase, 50 Hz

supply. Required fuse10A. Check that GB your domestic electrical installation can

take the maximum load required, also taking into account any other appliances in use.

Connect the machine to an earthed socket, in accordance with current wiring regulations.

The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precaution. Should the appliance power supply cable need to be replaced, this must be carried out by our Service Centre.

Important!

The power supply cable must be accessible after installing the machine.

Page 27
Image 27
Electrolux EDC 77550W user manual Door reversal, Electrical connection