Starting an Iron AidTM pro- gramme
Press the START/PAUSE button. The programme is started.
First, the drying phase indicator appears in the display.
The display will also show the pro- gramme duration for the selected Iron Aid programme, not including the addi- tional drying phase.
With wet laundry, after a few minutes the appliance will show the correct pro- gramme duration for the Iron Aid pro- gramme including the preceding drying programme.
As soon as the right level of dryness is reached, the Iron Aid programme will start automatically. The steam indicator shows the progress of the Iron Aid pro- gramme in the display. The individual steam phases are shown by
animated clouds of steam.
Important: During the steam phases that form part of the Iron Aid pro- gramme and also the
If the 
water tank indicator lights up when you select an Iron Aid programme, the programme cannot be started. You will need to fill the water tank first (see section on ‘Cleaning and maintenance, filling water tank’.)
starting an iron aidtm programme electrolux 21
It is normal for the appliance to make noises during an Iron Aid or drying pro- gramme if garments with hard parts, such as metal buttons, are put in the drum.
Changing a programme
To change a programme which has been selected by mistake once the pro- gramme has started, first turn the pro- gramme selector to ✯ OFF and then reset the programme.
The programme can no longer be changed directly once the pro- gramme has started. If you never- theless attempt to change the programme with the programme knob or an additional function but- ton (except the BUZZER button), the START/PAUSE button and Err will flash in the display. The drying pro- gramme is not however affected by this.
Putting in extra items or taking items out before end of pro- gramme
1.Open door.
2.Load or remove laundry items.
3.Close door securely.
4.Press the START/PAUSE button to continue the drying cycle.
