electrical connection electrolux 39

Electrical connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent per- son.

WARNING – THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any lia- bility should these safety measures not be observed.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.

Important:

The plug must be accessible after the appliance has been installed.

The appliance is supplied with a 13 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1363) fuse must be used.

Should the plug need to be replaced for any reason, proceed as described be- low.

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow:

Earth

Blue:

Neutral

Brown:

Live

• The wire coloured green and yellow must be connected to the terminal marked with the letter “E“ or by the earth symbol E or coloured green and yellow.

• The wire coloured blue must be con- nected to the terminal “N“ or coloured black.

Page 39
Image 39
Electrolux EDI 96150 W user manual Electrical connection