JVC KD-LX330R Using the security lock, Registering the password, English, Select a character

Using the security lock

You can prohibit the unauthorized use of this unit by the others.

To use the security lock, you need to set the password first. Once you set the password, the unit will ask you to enter the password when you turn on the unit for the first time after re-installation (or after recovering the car battery exhaustion).

CAUTION: Be careful not to forget the password you have entered; otherwise, you cannot use this unit. Keep the password in your mind and more importantly on paper or some other materials. You can write down your password in the spaces provided on the cover page.

Registering the password

You have to use 4 characters for your password. You can use the following characters: Capital letters (A – Z) and numerals (0 – 9).

2 Select a character.

As you turn the control dial, character changes as follows:

A B C..............Z

(alphabets)

9....... 2 1 0

(numerals)

3 Move the character entry position to the next.

ENGLISH

1 Press and hold both buttons for more than 2 seconds.

4 Repeat steps 2 and 3 until you enter all 4 characters.

The unit enters password entry mode.

5 Press SEL (select) to finish the setting.

The password flashes on the display for a while, then the unit returns to the normal operation mode.

How to Use the Provided CODE Sticker

Attach the provided CODE sticker in a conspicuous position on your car to notify would-be unauthorized users that the security lock function is provided for this unit and, therefore, will foil their efforts.

27